EDIS System (Escort & Tracer - 1.9L): Notes

NOTE: Start all diagnostics with QUICK TEST. See TESTS W/CODES - EEC-IV article in the ENGINE PERFORMANCE section. before entering this test. These tests are dependent on results and service codes received during QUICK TEST.

NOTE: EDIS Diagnostic Cable (Rotunda 007-00059) should be used to diagnose this system. This cable is equipped with additional circuits and components used to enhance and modify signals for testing purposes. If an aftermarket test cable is used or diagnosis is being performed using only a DVOM, become familiar with system wiring diagram and system operation.

NOTE: Refer to Figure -Figure when using pinpoint test procedures.