LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Variable Assist >> Pinpoint Tests >> Pinpoint Test C4 >> Steering Angle Sensor Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor Check

  1. Ensure ignition is off. Disconnect steering angle sensor connector. Set steering wheel so wheels are straight. Set VOM on 200-k/ohm scale. Measure resistance between Green and Green/White wires while turning steering wheel slowly from straight to 180 degrees left. If resistance decreases from 10 k/ohms to approximately 180 ohms, proceed to PINPOINT TEST C5  . If resistance is NOT as specified, replace steering angle sensor.
  2. Set steering wheel so wheels are straight. Measure resistance between Green and Green/Yellow wires. If resistance is 40-60 k/ohms, proceed to PINPOINT TEST C5  . If resistance is NOT as specified, replace steering angle sensor.
scientia non olet · About LEMON Manuals