LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Variable Assist >> Pinpoint Tests >> Pinpoint Test D2 >> Circuit Continuity Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Continuity Check

Turn ignition off. Set VOM on 200-ohm scale. Measure resistance between Green/Red wire in VAPS control module connector and Green/Red wire in instrument panel connector. If resistance is greater than 5 ohms, repair wire. If resistance is not as specified, proceed to PINPOINT TEST D3  .