LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Variable Assist >> Pinpoint Tests >> Pinpoint Test Q2 >> Power To VAPS Control Module Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power To VAPS Control Module Check

Disconnect VAPS control module connector. Turn ignition on. Set VOM on 20-volt scale. Measure voltage between Black/Green wire and ground. If voltage reading is greater than 10 volts, proceed to PINPOINT TEST Q3  . If voltage is not as specified, replace 10 amp fuse or repair Black/Green wire between module and fuse box.

scientia non olet · About LEMON Manuals