LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Variable Assist >> Pinpoint Tests >> Pinpoint Test Q5 >> Module/Test Connector Continuity Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module/Test Connector Continuity Check

Disconnect VAPS control module connector. Set VOM on 200-ohm scale. Measure resistance between Yellow/Black wires in VAPS test connector and module. If resistance is less than 5 ohms, proceed to PINPOINT TEST Q6  . If resistance is NOT as specified, repair Yellow/Black wire between module and test connector for opens.

scientia non olet · About LEMON Manuals