Fuel Pump Relay
NOTE:
Fuel pump relay is located inside Integrated Relay Control Module (IRCM) on 2.3L, 3.0L & 3.8L. For IRCM test procedures, see CIRCUIT TEST X in TESTS W/CODES
- EEC-IV article in the ENGINE PERFORMANCE section. For IRCM location on Sable and Taurus, see CONTROL UNITS
in ELECTRICAL COMPONENT LOCATOR article in ELECTRICAL. On all others, see CONTROL UNITS in appropriate ELECTRICAL COMPONENT LOCATOR article in ELECTRICAL.
Remove relay from vehicle. Connect battery voltage to terminal "C". See Fig 1 . Ground terminal "D". Measure resistance between terminals "A" and "B". Resistance should be less than one ohm with power applied and greater than 10 k/ohms with power removed.