Clearing Codes
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION Section before disconnecting battery.
To clear trouble codes, deactivate self-test by disconnecting jumper wire from STI connector. Disconnect negative (-) battery cable, and depress brake pedal for 5-10 seconds. All hard codes and intermittent codes will be erased from ECA memory.
SELF-TEST CONNECTOR LOCATION
| Application | Location |
|---|---|
| All Models | Left Rear Section Of Engine Compartment |