LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Escort Base, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Starter No-Load Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter No-Load Test

  1. Connect starting system test equipment following manufacturer instructions. See Fig 2 . Ensure carbon pile rheostat of starter tester is turned off.
  2. Connect heavy wire between negative battery terminal and starter frame. Connect another heavy wire between positive battery terminal and positive terminal of starter solenoid.
    CAUTION: Ensure starter is securely mounted in vise while energizing as starter will move or jump.
  3. Connect a jumper wire between battery positive terminal and terminal "S" on starter solenoid. Leave this jumper connected only long enough to read tester ammeter. See STARTER SPECIFICATIONS  .
Fig 1: Exploded View Of Motorcraft Starter Motor Assembly
G90C08158Courtesy of FORD MOTOR CO.
Fig 2: Identifying Starter No-Load Test Connections (Typical)
G90A08157Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals