LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Explorer 2D Utility, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Introduction >> Valve Clearance >> 2.3L Valve Clearance Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2.3L Valve Clearance Adjustment

NOTE: Valve clearance is nonadjustable, but clearance can be checked to determine if worn components exist.
  1. Rotate camshaft so base circle of camshaft lobe is positioned on valve to be checked. Using Valve Spring Compressor (T88T-6565-BH), apply pressure on cam follower until lash adjuster is fully collapsed.
  2. While holding lash adjuster in fully collapsed position, use feeler gauge to measure clearance between base circle of camshaft and camshaft follower. See 2.3L COLLAPSED VALVE LIFTER CLEARANCE table.
  3. If clearance is not within specification, inspect camshaft follower for damage. If camshaft follower is not damaged, check for sticking valve, or worn valve spring or camshaft lobe(s). If components are okay, check for defective lash adjuster. Replace components as necessary.
2.3L COLLAPSED VALVE LIFTER CLEARANCE

Application In. (mm)
2.3L OHC .035-.055 (.89-1.39)
scientia non olet · About LEMON Manuals