Test Equipment

Following test equipment is necessary to complete ICM ignition system tests.

• EI (Low Data Rate) Diagnostic Cable (007-00044)
• Spark Tester (D81P-6666-A & D89P-6666-A)
• Digital Volt-Ohmmeter (DVOM)
• Remote Starter Switch
• 2 EEC-IV Breakout Boxes (T83L-50-EEC-IV)
• EEC-IV Breakout Box 2.3L Overlay
• ICM Adapter Tachometer (007-00061)
• Inductive Type Timing Light (DO NOT use advance knob, if equipped, as it will not work correctly with EI ignition systems.)
• 12-Volt Test Light (Incandescent Type)
• Test Light (LED Type) Or Logic Probe (LED Type)
• ICM Tester (007-00071)
• ICM Coil/Sensor Tester (007-00072)