Check Remote Control Mirror Switch
Check voltages at remote control mirror switch as shown in SWITCH POSITION VOLTAGES (SWITCH CONNECTOR) table, while moving switch. If voltages are correct, go to test RM7. If voltages are not correct, replace remote control mirror switch.
SWITCH POSITION VOLTAGES
| Switch Position | Wire Color | Volts |
|---|---|---|
| Right Mirror Up | LT GRN/BLK | 12 |
| " | BRN | 0 |
| Right Mirror Down | LT/GRN/BLK | 0 |
| " | BRN | 12 |
| Right Mirror Left | BRN/BLK | 12 |
| " | BRN | 0 |
| Right Mirror Right | BRN/BLK | 0 |
| " | BRN | 12 |
| Left Mirror Up | LT GRN/YEL | 12 |
| " | BRN | 0 |
| Left Mirror Down | LT GRN/YEL | 0 |
| " | BRN | 12 |
| Left Mirror Left | BRN/YEL | 12 |
| " | BRN | 0 |
| Left Mirror Right | BRN/YEL | 0 |
| " | BRN | 12 |