Removal & Installation
WARNING: This page is about the Mustang LX, 2D Convertible, 2.3 M, Automatic, which is a different variant/trim than selected.
TRANS ID - A4LD
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 3.4 | 2.5 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.5 | 0.5 | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: OIL PUMP: Remove, Install, and Overhaul: |
| Front | | 0.7 | 0.4 | B |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.1 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANS OIL PUMP SEAL & BUSHING: Remove & Replace: |
| Front | | 0.2 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |
TRANS ID - AOD, AOD-E, AODE-W, AOT, 4R70W, 4R75E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 4.6 | 3.5 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.5 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: OIL COOLER LINES: Flush/Replace: |
| | 0.3 | | C |
| Combination Procedure: OIL PUMP: Overhaul: |
| Front | | 0.7 | | B |
| Combination Procedure: OIL PUMP: Remove & Replace: |
| Front | | 0.4 | | B |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.2 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |