Super Star II Tester

1)  Turn engine off and allow it to cool. Turn all accessories off. Connect tester. See SUPER STAR II TESTER under QUICK TEST. Ensure tester center button is released.

2)  Place shift lever in Park (A/T) or Neutral (M/T). Turn tester on, and set center button to TEST position. Observe LED indication as each input device is tested. See SWITCH MONITOR TEST SPECIFICATIONS table.

3)  Test EEC input devices individually. Turn device off after test. Leaving device on while testing another device may produce false results and cause misdiagnosis. If input device fails test (reading on Super Star II tester is not as indicated), perform related circuit test. See SWITCH MONITOR TEST SPECIFICATIONS table.

4)  If all input devices fail, check Switch Monitor Light (SML) circuit. See TEST SML. If all input devices test okay and no code is stored in PCM memory, EEC system test is complete.