Relay Operation Check
WARNING: This page is about a different car, the 1994 Mercury Tracer, 1994 Ford Probe, and 1994 Ford Escort. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Disconnect ABS control unit. See COMPONENT LOCATIONS . Turn ignition on. Using jumper wire, connect Black/Blue wire at ABS control unit connector to ground. If relay clicks, go to PINPOINT TEST FSR-4 . If relay does not click, inspect Black/Blue wire from relay to ABS control unit. If fault is found, repair wire. If no fault is found, go to PINPOINT TEST FSR-6 .