LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Pinpoint Tests >> Pinpoint Test MMR-7 >> Motor Resistance Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Motor Resistance Check

Turn ignition off. Disconnect hydraulic actuation assembly 2-pin connector from motor. Set VOM on 200-ohm scale. Measure resistance between terminals on motor. See Figure . If resistance is less than one ohm, go to PINPOINT TEST MMR-8  . If resistance is greater than one ohm, replace hydraulic actuation assembly.

scientia non olet · About LEMON Manuals