LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crankshaft Position Sensor >> Removal (3.8L SC)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal (3.8L SC)

Disconnect negative battery cable. Disconnect sensor connector. Raise vehicle. Remove upper and lower damper shield assemblies. Rotate by hand to position metal vane of shutter (attached to rear of damper) outside of sensor air gap. Remove crankshaft sensor bolts. Remove sensor.

scientia non olet · About LEMON Manuals