LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Riding Height Adjustment >> Mark VII >> Checking Riding Height
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking Riding Height

  1. Drive onto alignment rack. Turn ignition off. Level rack as necessary. Turn ignition switch to RUN position (DO NOT start). Allow one minute for vehicle to level. Push trunk release, turn ignition off and exit vehicle.
  2. Allow 20 seconds for vehicle to vent to trim height (all doors closed). Turn air suspension system switch to OFF position. Switch is located in trunk, on left front side panel. Check for proper riding height. See Fig 1. Adjust as necessary.
Fig 1: Checking Riding Height (Mark VII)
G56536Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals