LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Crown Victoria Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Wheel Alignment Procedures >> Camber Adjustment (Front)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camber Adjustment (Front)

  1. Camber/Caster Adjusters (T79P-3000-A) are needed to adjust camber angles. Insert camber/caster adjusters into frame holes. See Fig 1 . Tighten adjuster hooks finger tight against upper arm inner shaft. Tighten hex nut of each adjuster one additional hex flat.
  2. Loosen upper arm inner shaft-to-frame retaining bolts so lock washers are unloaded. Firmly tap bolt heads to ensure loosening of retaining bolts. Adjust camber angle. Tighten upper arm inner shaft-to-frame retaining bolts.
Fig 1: Adjusting Camber/Caster
G91B07827Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals