Right Window Switch Without Door Lock & Keyless Entry

1. Remove window switch from vehicle. See WINDOW SWITCH under REMOVAL & INSTALLATION. Position raised portion of window switch knob with face right exposing 5 terminals. Use a self-powered test light or ohmmeter to test window switch.
2. With window switch in neutral position, there should be continuity between terminals No. 1 and 2, and terminals No. 3 and 4. See Fig 1 . Terminal No. 5 should be disconnected from all other terminals.
3. When raised portion of window switch rocker knob is pushed, closing windows, there should be continuity between terminals No. 1 and 5, and terminals No. 3 and 4. Terminal No. 2 should be disconnected from all other terminals.
4. When depressed portion of window switch rocker knob is pushed, opening windows, there should be continuity between terminals No. 1 and 2, and terminals No. 4 and 5. Terminal No. 3 should be disconnected from all other terminals. If window switch does not test correctly, replace window switch.

Fig 1: Right Window Switch W/O Door Lock & Keyless Entry Terminals ID

Courtesy of FORD MOTOR CO.