Control To Motor Wire Check
- Unplug mirror switch connector. Unplug inoperative mirror motor connector. Measure resistance of indicated wires between mirror switch connector and inoperative mirror motor connector. See OUTSIDE REAR VIEW MIRROR CIRCUIT TEST
table. If resistance is less than 5 ohms, replace outside rear view mirror assembly. If resistance is 5 ohms or greater, repair open wire(s).OUTSIDE REAR VIEW MIRROR CIRCUIT TEST
| Wire Color At Control Connector |
Wire Color At Motor Connector |
| Left Mirror |
| Brown |
Brown |
| Brown/Yellow |
Brown/Yellow |
| Light Green |
Light Green |
| Right Mirror |
| Brown |
Brown |
| Brown/Black |
Brown/Black |
| Light Green/Black |
Light Green/Black |