LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel System Pressure Release >> All Others
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All Others

  1. Remove fuel cap to release fuel tank pressure. Remove relief valve cap. Relief valve is located on fuel supply manifold. Using Fuel Pressure Gauge (T80L-9974-B), release fuel pressure from relief valve (Schrader valve).
  2. If fuel pressure gauge is not available, disconnect electrical connector to IFS switch. For IFS switch location, see INERTIA FUEL SHUTOFF (IFS) SWITCH LOCATION table. Crank engine for 15 seconds to reduce system pressure. Turn ignition off. Reconnect IFS switch connector.
INERTIA FUEL SHUTOFF (IFS) SWITCH LOCATION

Application Location
Escort & Tracer
Sedan Right Side Of Trunk
Wagon Behind Access Door In Right
Rear Cargo Area
Mark VIII Left Front Of Trunk
Mustang Rear Center Of Trunk
Probe Right Side Of Trunk
Sable & Taurus
Sedan Left Side Of Trunk
Wagon Behind Access Door In
Right Rear Cargo Area
All Others In Trunk On Left Hinge Support Or Behind Trim Panel