Fuel Injector Resistance
WARNING: This page is about a different variant/trim than selected.
Disconnect injector harness connectors. Using digital ohmmeter, measure resistance between injector terminals. If resistance is not 11-19 ohms, replace injector.
NOTE:
For additional testing and information, see FUEL SYSTEM in appropriate SYSTEM/COMPONENT TESTS
article as listed below.
- SYSTEM/COMPONENT TESTS - EEC (2.5L) (for Probe 2.5L)
- SYSTEM/COMPONENT TESTS - EEC-IV (3.0L) (for Sable, Taurus, Tempo & Topaz)
- SYSTEM/COMPONENT TESTS - EEC-IV (3.2L SHO) (for Taurus)
- SYSTEM/COMPONENT TESTS - EEC-IV (3.8L) (for Continental, Cougar, Sable, Taurus & Thunderbird)
- SYSTEM/COMPONENT TESTS - EEC-V (for Mustang)