LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Lubrication >> Draining & Refilling >> Transmission/Transaxle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Draining & Refilling: Transmission/Transaxle

  1. Raise and support vehicle. Place drain pan under transmission. Loosen oil pan retaining bolts. Drain fluid from transmission. Remove oil pan bolts individually. This allows remaining fluid to drain slowly to prevent spillage. Remove oil pan.
  2. Discard pan gasket. Remove and clean filter screen. Reinstall or replace filter screen using new "O" rings.
  3. Clean oil pan, and install pan using new pan gasket. Pour 3 qts. (2.8L) of fluid through filler tube. Start engine, and engage all gears. Check fluid level, adding required amount.
NOTE: Transmission oil cooler and lines should be thoroughly flushed if transmission is removed for any reason. Use Cooler Line Disconnector (T82L-9500-AH) when disconnecting cooler lines.
scientia non olet · About LEMON Manuals