LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1995 >> Crown Victoria Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
EVO Actuator Mount Bolt 10-15 (14-20)
Pressure Hose Nut-To-Pump 40-54 (54-73)
Pump Mount Bolt 15-22 (20-30)
Quick-Connect Fitting 35-45 (47-61)
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Control Valve Housing Bolts 30-45 (41-61)
Flexible Coupling Bolt 20-30 (27-41)
Idler Arm-To-Center Link Nut 50-67 (68-91)
Idler Arm-To-Frame Bolt 73-97 (99-132)
Piston End Cap 70-110 (95-149)
Pitman Arm Retaining Nut 200-250 (271-339)
Pitman Arm-To-Center Link Nut 35-47 (47-64)
Pressure Line-To-Steering Gear 20-30 (27-41)
Race Nut 55-90 (75-122)
Return Line-To-Steering Gear 20-30 (27-41)
Sector Shaft Cover Bolts 55-70 (75-95)
Steering Gear Mounting Bolts 50-65 (68-88)
Tie Rod End Castle Nut 35-47 (47-64)
Tie Rod End Clamp Nut 20-22 (27-30)
Worm Bearing Race Nut (1) 55-90 (75-122)
INCH Lbs. (N.m) 
Allen Head Set Screw 15-25 (1.7-2.8)
Ball Bearing Return Guide Clamp Screws 42-70 (4.8-7.9)
Hose Clamps 12-24 (1.4-2.7)
(1) To obtain proper torque reading when using Adapter T66P-3553-B), multiply desired torque reading by length of torque wrench. Divide result by total wrench and adapter length (5.5"). Example: With a 13" torque wrench, 5.5" adapter and a desired torque value of 55 ft. lbs. (75 N.m), the actual torque reading would be 39 ft. lbs. (52 N.m).