LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1995 >> Crown Victoria Base >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Ignition Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch: Installation

  1. Ensure pin slot in ignition switch is in RUN position. Turn lock cylinder to START position and release. This sets lock cylinder and actuator pin in RUN position.
  2. Install ignition switch. Ensure actuator pin engagement is in switch slot. Connect ignition switch electrical connector. Install tilt lever (if equipped). Connect battery cables. Test ignition switch operation. Install steering column shroud and trim cover.
scientia non olet · About LEMON Manuals