Removal & Installation
WARNING: This page is about the Econoline E150, 4.9 Y, C6, which is a different variant/trim than selected.
TRANS ID - AOD, AOD-E, AODE-W, AOT, FIOD, 4R70E, 4R70W, 4R75E, 4R75W
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 3.8 | 2.8 | C |
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: |
| w/Multi-Piece Driveline add | | 0.2 | 0.2 | C |
| w/Trans Skid Plate add | | 0.2 | 0.2 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.5 | 0.5 | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | 0.3 | C |
| Combination Procedure: OIL COOLER LINES: Flush/Replace: |
| | 0.3 | 0.2 | C |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.1 | | B |
| Combination Procedure: TRANS OIL PUMP: Overhaul: |
| Front | | 0.6 | | B |
| Combination Procedure: TRANS OIL PUMP: Remove & Replace: |
| Front | | 0.4 | | B |
| Combination Procedure: TRANS OIL PUMP BUSHINGS & SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |
TRANS ID - C6
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| In-Line6 | | 3.6 | 2.7 | C |
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: |
| w/Multi-Piece Driveline add | | 0.2 | 0.2 | C |
| w/Trans Skid Plate add | | 0.2 | 0.2 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.5 | 0.5 | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | 0.3 | C |
| Combination Procedure: OIL COOLER LINES: Flush/Replace: |
| | 0.3 | 0.2 | C |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.1 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANS OIL PUMP: Overhaul: |
| Front | | 0.8 | 0.8 | B |
| Combination Procedure: TRANS OIL PUMP BUSHINGS & SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |
TRANS ID - E4OD, 4R100
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| In-Line6 | | 3.6 | 2.7 | C |
| Combination Procedure: BAND: Remove & Replace: |
| | 2.3 | 1.7 | A |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.5 | 0.5 | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | 0.3 | C |
| Combination Procedure: OIL COOLER LINES: Flush/Replace: |
| | 0.3 | 0.2 | C |
| Combination Procedure: OIL COOLER LINES: Remove & Replace: |
| | 0.3 | 0.2 | C |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.2 | 0.1 | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANS OIL PUMP: Overhaul: |
| Front | | 1.1 | 0.9 | B |
| Combination Procedure: TRANS OIL PUMP: Remove & Replace: |
| Front | | 0.6 | 0.4 | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |