LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1995 >> Escort Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Testing >> Pinpoint Test A - Power Window System Inoperative
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test A - Power Window System Inoperative

  1. Fuse Check: Ensure ignition is off. Check POWER WINDOW (30-amp) fuse. If use is blown, go to next step. If fuse is good, go to step 4).
  2. System Check: Turn ignition off. Replace POWER WINDOW fuse. If fuse blows, go to next step. If fuse does not blow, go to step 4).
  3. Circuit Check: Turn ignition off. Locate and unplug 6-pin interior fuse junction panel connector. Access and unplug master power window switch connector. Measure resistance between Black/White wire at interior fuse junction panel connector and ground. If resistance is greater than 10,000 ohms, go to next step. If resistance is less than 10,000 ohms, Repair Black/White wire.
  4. Ground Check: Turn ignition off. Unplug power window master switch connector. See Figure . Measure resistance between Black wire at power window master switch connector and ground. If resistance is less than 5 ohms, go to next step. If resistance is greater than 5 ohms, repair open in Black wire. Retest system.
  5. Power Window Master Switch Check: Perform master switch test. See MASTER SWITCH  under COMPONENT TESTING. If master switch is good, repair Black/White wire between interior fuse junction panel and power window master switch. If master switch is faulty, replace switch and retest system.
scientia non olet · About LEMON Manuals