Programmable Memory Seat Module (Explorer Limited Edition): Notes

The memory seat module has a built-in diagnostic feature that greatly enhances its serviceability.

1. To place the module into the diagnostic mode, press the white button located on the top of the module. Module is located under driver's seat.
2. Place the module in either of the two available diagnostic test modes by pressing the test button. This button is recessed into the top rear inboard edge of the driver side memory module. The memory module is mounted to the front seat track on the inboard side.
3. The test results are viewed as coded pulses of the test LED. This LED is located inboard of the 21-pin receptacle on the rear of the memory module. The driver side module test results may also be read on the LED located in the memory SET/RECALL switch on the driver side door.