Master Switch, Ranger
NOTE:
Use a self-powered test lamp or a Digital Volt-Ohmmeter to test the power window switch.
- With the switch in the NEUTRAL position, there should be continuity between terminals No. 1, 3, 4, 5 and 6. See Fig 1.
- When the ribbed portions of the switch rocker knobs are pushed (to close the windows), there should be continuity between terminals No. 1, 2, and 3 and terminals No. 4, 5 and 6.
- When the flat portions of the switch rocker knobs are pushed (to open the windows), there should be continuity between terminals No. 1, 3 and 5 and terminals No. 2, 4 and 6.
- If the switch assembly does not test as outlined, replace the switch.