Disabling One-Touch Window (Ranger & Explorer)
- Close both front doors.
- Key on.
- Key off.
- Remove key from ignition switch.
- Press and hold the down window switch to enable/disable the one-touch window feature.
- Reinsert the key into the ignition switch within two seconds after pressing the down window switch.
- Continue to hold the switch until a two-second tone is heard.
- Release the switch while the tone is active.
- After the two-second tone, the following confirmation beep sequences will be heard:
- One beep means feature is disabled.
- Two beeps mean feature is enabled.
- Repeat the procedure again to toggle back and forth.