Hall Effect Sensor: Specifications

Stator Retaining Screws or screws 1.7-4.0 Nm (15-35 in lb)
Octane Rod And Retaining Screw 1.7-4.0 Nm (15-35 in lb)
Armature Screws 2.8-4.0 Nm (25-35 in lb)
Ignition Control Module Retaining Screws 1.7-4.0 Nm (15-35 in lb)
Distributor Cap Screws 2.0-2.6 Nm (18-25 in lb)