LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Module Communications Network System >> Self-Diagnostic System >> Diagnostic Commands
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Commands

  1. This test is used to verify the operation of the output circuitry of the module being tested. The ignition switch must be in the RUN position or test will fail. Perform New Generation Star Tester Hookup and vehicle selection. See NEW GENERATION STAR (NGS) TESTER USAGE  .
  2. Rotate dial to menu item Diagnostic Data Link and press trigger.
  3. Select module by rotating dial to highlight module and press trigger.
  4. Rotate dial to highlight menu item Active/Command Modes, press trigger.
  5. Rotate dial to selected command and press trigger. Command the output by rotating dial and pressing trigger as needed.
scientia non olet · About LEMON Manuals