LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Module Communications Network System >> Self-Diagnostic System >> Retrieving PID Information
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Retrieving PID Information

  1. This test is used to verify operation of input circuitry to the module being tested. The ignition switch must be in the RUN position or test will fail. Perform New Generation Star Tester hookup and vehicle selection. See NEW GENERATION STAR (NGS) TESTER USAGE  .
  2. Rotate dial to menu item Diagnostic Data Link and press trigger.
  3. Select module by rotating dial to highlight module and press trigger.
  4. Rotate dial to highlight menu item PID/Data Monitor and Record, press trigger.
  5. Select PID acronyms by rotating dial to highlight a PID and then press trigger. Repeat this process until all PIDs are selected. (* - indicates that a PID has been selected.)
  6. Press Button 7 to view all selected PIDs. See PARAMETER IDENTIFICATION DEFINITIONS. 
scientia non olet · About LEMON Manuals