LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Probe Base, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Disabling & Activating Air Bag System >> Activating System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Activating System

  1. Ensure BOTH battery cables are disconnected. Wait one minute. Remove air bag simulator(s) from driver-side air bag and passenger-side air bag wiring harness connector (if equipped).
  2. Reconnect driver-side air bag connector to air bag module. Install driver-side air bag module on steering wheel. Tighten nut and washer assemblies to specification. See TORQUE SPECIFICATIONS  .
  3. Reconnect passenger-side air bag connector to air bag module (if equipped). Install passenger-side air bag module. Tighten bolts to specification. Install trim panels as necessary. Connect positive battery cable, then connect negative battery cable. Check AIR BAG light for system faults.
scientia non olet · About LEMON Manuals