Steering Column

TORQUE SPECIFICATIONS
Boot Assembly-To-Dash Panel Nuts 4.5-6.3 Nm (40-55 inch lbs.)
Cover Reinforcement Screws 10-14 Nm (88-123 inch lbs.)
Bolt, Intermediate Shaft-To-Steering
Column (2 Places) 40-54 Nm (30-40 ft. lbs.)
Instrument Panel Finish Screws 2.1-2.9 Nm (19-25 inch lbs.)
Upper/Lower Shroud-To-Steering
Column screws 0.7-1.1 Nm (6-10 inch lbs.)
Steering Column Cover Retaining Screw 11.8-12.2 Nm (105-107 inch lbs.)
Tilt Handle Shank To Tilt Lever 3.5-5 Nm (31-44 inch lbs.)