Power

NOTE: Both optional power rear quarter windows are activated by a direct drive electric motor.

1. Disconnect the battery ground cable.
2. Remove the rear quarter trim panel.
3. Disconnect the power rear quarter window motor electrical connector.
4. Remove clip retaining latch to quarter window bracket.
5. Separate latch from bracket attached to glass by lifting upon retaining tab and pulling latch forward.
6. Remove the three power rear quarter window motor bracket retaining screws.
7. Remove the power rear quarter window motor assembly from the vehicle.
8. To install, reverse Removal procedure. Tighten screws to 10-14 Nm (89-124 lb-in).