LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1997 >> Contour Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Module Communications Network) >> Communication Network Diagnostics >> Inspection & Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection & Verification

WARNING: This page is about a different car, the 1997 Ford RV Cutaway, 1997 Ford Econoline, 1997 Ford Cutaway, and 1997 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Following inspection and verification should be followed for diagnosing module communications network.
  1. Verify customer's original problem. Inspect vehicle for any obvious electrical component wiring or connector damage.
  2. Inspect pins in 16-pin Data Link Connector (DLC) for damage. See Figure. The DLC is located below driver's side of instrument panel, to the right of steering column. If pins are okay, perform DATA LINK DIAGNOSTICS. If pins are damaged, repair as necessary and perform DATA LINK DIAGNOSTICS.
scientia non olet · About LEMON Manuals