Power Window Single Switch
WARNING: This page is about a different car, the 1997 Mercury Mountaineer and 1997 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Remove suspect window switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Check for continuity between terminals as specified while operating switch. See appropriate SWITCH TESTING TABLE. If continuity does not exist as specified, replace switch. See Fig 1 or Fig 2 .
RIGHT FRONT & LEFT REAR SWITCH TESTING
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 3 & 7; 1 & 2; 5 & 6 |
| Up | 2 & 4; 5 & 6 |
| Down | 4 & 5; 1 & 2 |
RIGHT REAR PASSENGER SWITCH TESTING
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 3 & 7; 1 & 5; 2 & 6 |
| Up | 4 & 5; 2 & 6 |
| Down | 2 & 4; 1 & 5 |