Windows Operate From Master Switch Only
WARNING: This page is about a different car, the 1997 Mercury Mountaineer and 1997 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition switch to OFF position. Remove and disconnect master window switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Ensure window lock-out switch on master switch is in OFF position. Measure resistance between master window switch terminals No. 19 and 20. See Figure . If resistance is less than 5 ohms, repair open in Red/Light Blue wire. If resistance is greater than 5 ohms, replace master switch. Clear DTCs and retest.