Engine Cooling Fan - EEC-V: Testing: Notes
WARNING:
To avoid injury from accidental air bag deployment, read and follow all SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM procedures in AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES/SAFETY EQUIPMENT section.
NOTE:
Retrieval of Diagnostic Trouble Codes (DTCs) on EEC-V equipped vehicles is accomplished using Ford New Generation Star (NGS) Scan Tool (007-00500) or a generic scan tool. To retrieve and clear DTCs, follow scan tool manufacturer's instructions.
NOTE:
A breakout box, connected to vehicle harness at Powertrain Control Module, is necessary to perform the following tests. References to Test Pin No. found in the following test steps refers to test terminals on manufacturer's breakout box.