LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1997 >> Probe Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 2.0L >> Relays & Solenoids >> Relays >> Fuel Pump Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Relay

  1. Turn ignition off. Leave fuel pump relay disconnected. Measure resistance between terminals No. 1 or No. 85 and all other terminals. To Identify fuel pump relay terminals, refer to numbers molded on relay.
  2. Resistance should be either 40-120 ohms, or greater than 10,000 ohms. Replace fuel pump relay if resistance is not as specified. If resistance is okay, see CIRCUIT TEST KA in TESTS W/CODES - 2.0L article for additional testing procedures.
scientia non olet · About LEMON Manuals