LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1997 >> Probe Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Module Communications Network) >> Communication Network Diagnostics >> Retrieving Diagnostic Trouble Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Retrieving Diagnostic Trouble Codes

WARNING: This page is about a different car, the 1997 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Procedure may be used for retrieving continuous Diagnostic Trouble Codes (DTCs).
  1. Connect New Generation Star (NGS) scan tester on Data Link Connector (DLC) and perform proper hook-up procedure. See EQUIPMENT HOOK-UP under COMMUNICATION NETWORK DIAGNOSTICS  .
    NOTE: Ensure ignition switch is in ON position when performing this procedure or this procedure will fail.
  2. Turn ignition switch to ON position. Rotate dial on scan tester to DIAGNOSTIC DATA LINK menu and press trigger.
  3. Rotate dial on scan tester to highlight the desired module you wish to access. Ensure DIAGNOSTIC TEST MODES is highlighted and press trigger.
  4. Rotate dial on scan tester to highlight RETRIEVE/CLEAR CONTINUOUS DTC and press trigger. Press button No. 3 to start.
  5. Record all Diagnostic Trouble Codes (DTCs) that are displayed for specified module. Proceed to DIAGNOSTIC TROUBLE CODE (DTC) DEFINITIONS for DTC identification and reference for proper DTC testing procedure. DIAGNOSTIC TROUBLE CODE (DTC) DEFINITIONS are listed after TESTING  in this article.
scientia non olet · About LEMON Manuals