LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1997 >> Probe Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 2.0L >> Ignition System >> Distributor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition System: Distributor: Removal

  1. Remove high tension leads and distributor cap. Rotate crankshaft in direction of normal rotation until piston No. 1 is at TDC of compression stroke. Disconnect negative battery cable.
  2. Ensure timing marks are aligned. Disconnect distributor wiring from harness. Mark distributor rotor-to-housing and housing-to-engine position for installation reference. Remove distributor hold-down bolt(s) and clamp. Remove distributor. Inspect distributor "O" ring and replace if necessary.
scientia non olet · About LEMON Manuals