Trouble Shooting
Before performing individual component or system tests, check the following for possible cause of system malfunction.
- Low Battery Charge
- Faulty Fuse(s)
- Loose Or Corroded Connectors
- Damaged Wiring
- Damaged Transmitter
- Faulty Transmitter Batteries
- Binding Locks Or Latches
Before proceeding with testing, disconnect and reconnect negative battery cable to reset system. If problem remains, connect and operate New Generation Star (NGS) Tester (007-00500) following manufacturer's instructions. Perform data link diagnostics test. See MODULE COMMUNICATIONS NETWORK article. If NGS responds with NO RESPONSE/NOT EQUIPPED for driver's door module, go to NO COMMUNICATION WITH DRIVER DOOR MODULE under SYMPTOM TESTS . If NGS responds with NO RESPONSE/NOT EQUIPPED for SCIL control control module, go to NO COMMUNICATION WITH SCIL CONTROL MODULE under SYMPTOM TESTS .
If data link diagnostics test is passed for driver door or lighting control module(s), retrieve and record continuous Diagnostic Trouble Codes (DTCs) and execute self-test diagnostics for driver door or lighting control module to retrieve current DTCs. See DIAGNOSTIC TESTS .
If self-test is passed and no DTCs are retrieved, go to SYMPTOM TESTS .
| DTC (1) | Description | ||
|---|---|---|---|
| B1342 | ECU Defective | ||
| B1396 | Power Door Lock Short To Voltage | ||
| B1525 | Keyless Entry Short To Voltage | ||
| B1554 | Decklid Release Short To Ground | ||
| B1676 | Battery Voltage Out Of Range | ||
|
|||