Removal & Installation
WARNING: This page is about a different car, the 1997 Mercury Tracer and 1997 Ford Escort. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Remove door pull cup retaining screw. Remove screw cap and screw from inside door handle and disconnect door latch remote control link.
- Remove 2 push pins from front door trim panel. Push inboard, then upward to remove front door trim panel. Squeeze tabs and remove power window master control switch from panel then remove electrical connector from retainer. Remove 2 switch retaining screws and remove switch. To install, reverse removal procedure.