LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Contour Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Computer Relearn Procedures) >> Computer Relearn Procedures >> Crown Victoria & Grand Marquis >> Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter Programming

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1999 Mercury Villager, 1999 Mercury Tracer, 1999 Mercury Sable, 1999 Mercury Mystique, and 1999 Mercury Mountaineer. However, it is still accessible from the selected car via links, so may be relevant.

Open driver's window. Turn ignition switch from LOCK to RUN position 4 times within 3 seconds ending in RUN position. Door locks will lock then unlock to verify programming mode has been entered. Press any button on transmitter to be programmed. Within 7.5 seconds, press any button on next transmitter to be programmed and so on until all transmitters are programmed. To exit programming mode, turn ignition switch to START position or wait for more than 7.5 seconds.