LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Contour SVT >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Module Communications Network >> Description & Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Description & Operation

Vehicle has 2 module communications networks. The Powertrain Control Module (PCM) and Passive Anti-Theft System (PATS) module are connected to the multiplex communications network through a pair of twisted wires or BUS. The BUS network is also referred to as Standard Corporate Protocol (SCP). The BUS consists of (+) circuit 4-PB9 and a (-) circuit 5-PB9. The Anti-Lock Brake System (ABS) module is connected to the ISO 9141 diagnostic communications network through a single wire (circuit 8-CF29). Both networks are connected to the Data Link Connector (DLC). This article is used to diagnose BUS and ISO communications network circuit faults. For module locations, see COMPONENT LOCATIONS table.

COMPONENT LOCATIONS

Component Location
Anti-Lock Brake System Module Left Rear Corner Of Engine Compartment
Central Timer Module Behind Driver's Side Of Instrument Panel, At Fuse Block
Data Link Connector Below Driver's Side Of Instrument Panel, To Right Of Steering Column
Powertrain Control Module Right Side Of Engine Compartment, On Firewall
Passive Anti-Theft System Module Behind Glove Box