LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window System >> System Testing >> Test D: Single Window Is Inoperative
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test D: Single Window Is Inoperative

  1. Power Window Operation Check  - Turn ignition switch to RUN position. Operate all windows from driver door master window switch. If all windows operate from master switch, go to next step. If all windows do not operate from master switch, go to TEST C: POWER WINDOWS COMPLETELY INOPERATIVE  .
  2. Check Individual Window Operation  - Turn ignition switch to RUN position. Ensure window lock-out switch on driver door master window switch is in OFF position. Operate all windows from passenger switches. If all windows operate, advise customer of lock-out feature. If single window does not operate, go to next step.
  3. Check Red/Light Blue Wire  - Ensure window lock-out switch on master switch is in OFF position. Remove and disconnect inoperative window control switch. Check for battery voltage at Red/Light Blue wire at inoperative window control switch connector. If battery voltage is not present, repair Red/Light Blue wire and retest system operation. If battery voltage is present, go to next step.
  4. Check Switch Circuits  - Remove and disconnect driver door master window switch connector C503. Disconnect single switch for inoperative window. Check UP and DOWN circuits between driver door master window switch and single switch for inoperative window for open or short to ground. See WIRING DIAGRAMS  . Repair open or shorted circuit as necessary and retest system operation. If circuits are okay, go to next step.
  5. Check Motor Circuits  - Disconnect inoperative power window motor connector. Check Red/Yellow and Yellow/Red wires between single switch and window motor for open or short to ground. Repair open or shorted wires as necessary and retest system operation. If Red/Yellow and Yellow/Red wires are okay, replace window motor and retest system operation.