Master Window Switch
Remove driver door master window switch from vehicle. Using an ohmmeter, check resistance between specified terminals while operating switch. See MASTER WINDOW SWITCH TESTING table. See Fig 1 . Replace switch if resistance between specified terminals is 5 ohms or more. DO NOT check resistance between terminals not specified.
MASTER WINDOW SWITCH TESTING
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Left | ||
| Up | 10 & 13; 6 & 12 | |
| Down | 6 & 10; 7 & 13 | |
| Right | ||
| Up | 11 & 15; 8 & 9 | |
| Down | 8 & 11; 14 & 15 | |