LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Explorer 2D Utility, 4.0 X, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window System >> System Testing >> Test D: Right Front Window Does Not Operate, 2-Door Models (Left Front Window Operates)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test D: Right Front Window Does Not Operate, 2-Door Models (Left Front Window Operates)

  1. Check For Voltage To Right Front Window Switch  - Turn ignition off. Remove and disconnect right front window switch connector C615. Turn ignition switch to RUN position. Using a voltmeter, check voltage between ground and right front window switch connector C615 Light Blue/Black wire terminal. If voltage is more than 10 volts, go to next step. If voltage is 10 volts or less, repair open in Light Blue/Black wire. Clear DTCs and retest system operation.
  2. Check Right Front Window Switch Ground Circuits  - Turn ignition off. Using an ohmmeter, check resistance between ground and right front window switch connector C615 White/Yellow wire terminal. Check resistance between ground and right front window switch connector C615 Tan/Light Blue wire terminal. If resistances are 14 ohms or more, go to next step. If resistances are less than 14 ohms, go to step 4).
  3. Check White/Yellow & Tan/Light Blue Wires For Open  - Remove and disconnect driver door master window/door lock control switch connector C515. Using an ohmmeter, check resistance in White/Yellow wire between driver door master window/door lock control switch connector C515 and right front window switch connector C615. Check resistance in Tan/Light Blue wire between driver door master window/door lock control switch connector C515 and right front window switch connector C615. If resistances are less than 5 ohms, replace right front window switch. Clear DTCs and retest system operation. If resistances are 5 ohms or more, repair open in White/Yellow or Tan/Light Blue wire(s). Clear DTCs and retest system operation.
  4. Check Right Front Window Switch Down Operation  - Connect jumper wire between right front window switch connector C615 White/Yellow and Yellow/Red wire terminals. Connect another jumper wire between right front window switch connector C615 Light Blue/Black and Red/Yellow wire terminals. Turn ignition switch to RUN position. If right front window operates in DOWN direction, replace inoperative window switch. Clear DTCs and retest system operation. If right front window does not operate in DOWN direction, remove jumper wires and go to next step.
  5. Check Right Front Window Switch Up Operation  - Turn ignition off. Connect jumper wire between right front window switch connector C615 Red/Yellow and Tan/Light Blue wire terminals. Connect another jumper wire between right front window switch connector C615 Yellow/Red and Light Blue/Black wire terminals. Turn ignition switch to RUN position. If right front window operates in UP direction, replace inoperative window switch. Clear DTCs and retest system operation. If right front window does not operate in UP direction, remove jumper wires and go to next step.
  6. Check Yellow/Red Wire For Open  - Turn ignition off. Disconnect right front power window motor connector C604. Using an ohmmeter, check resistance in Yellow/Red wire between right front window switch connector C615 and right front power window motor connector C604. If resistance is less than 5 ohms, go to next step. If resistance is 5 ohms or more, repair open in Yellow/Red wire. Clear DTCs and retest system operation.
  7. Check Red/Yellow Wire For Open  - Using an ohmmeter, check resistance in Red/Yellow wire between right front window switch connector C615 and right front power window motor connector C604. If resistance is less than 5 ohms, replace right front power window motor. Clear DTCs and retest system operation. If resistance is 5 ohms or more, repair open in Red/Yellow wire. Clear DTCs and retest system operation.
scientia non olet · About LEMON Manuals